Article-Journal

A single three-parameter tilted fibre Bragg grating sensor to monitor the thermosetting composite curing process
AbstractThe unique sensing features of the tilted Fibre Bragg Grating (TFBG) as a single three-parameter optical sensor are …
Cite DOI URL
Atomic Layer Deposition on Porous Substrates: From General Formulation to Fibrous Substrates and Scaling Laws
Atomic layer deposition (ALD) is a technique of choice for a uniform, conformal coating of substrates of complex geometries, owing to …
Cite DOI URL
In Situ Characterization of the Reaction-Diffusion Behavior during the Gradient Interphase Formation of Polyetherimide with a High-Temperature Epoxy System

Add the full text or supplementary notes for the publication here using Markdown formatting.

Cite URL
Novel tooling for direct melt impregnation of textile with variotherm injection moulding: Methodology and proof of concept

Add the full text or supplementary notes for the publication here using Markdown formatting.

Cite
Recycled carbon fibre mats for interlayer toughening of carbon fibre/epoxy composites
Exploring routes for the effective use of recycled carbon fibres (rCFs) is critical to close the loop in the life cycle of carbon …
Cite DOI URL
The effects of misaligned adherends on static ultrasonic welding of thermoplastic composites
Ultrasonic welding is a promising joining technique for thermoplastic composite parts. On the way towards upscaling and …
Cite DOI URL
An inter-ply friction model for thermoset based fibre metal laminate in a hot-pressing process
Forming process with pre-stacked and uncured thermoset fibre metal laminate offers improved deformability compared to full-cured …
Cite DOI URL
Characterising microstructural organisation in unidirectional composites
Understanding the three-dimensional variability of unidirectional composites is relevant to the material performance and the …
Cite DOI URL
Deconsolidation of thermoplastic prepreg tapes during rapid laser heating
In this study, the effect of rapid laser heating, which is typical during laser-assisted fiber placement (LAFP), on the micro- and …
Cite DOI URL
Effect of a Dwell Stage in the Cure Cycle on the Interphase Formation in a Poly(ether imide)/High Tg Epoxy System
Epoxies are inherently brittle materials and to overcome this brittleness, a second microphase (i.e., thermoplastic) is typically …
Cite DOI URL