Publications

Dimitrios Apostolidis, William E. Dyer, Clemens A. Dransfeld, Baris Kumru (2024). An algae-derived partially renewable epoxy resin formulation for glass fibre-reinforced sustainable polymer composites. RSC Applied Polymers.

Ujala Farooq, Ekaterina Sakarinen, Julie Teuwen, René Alderliesten, Clemens Dransfeld (2023). Synergistic Toughening of Epoxy through Layered Poly(ether imide) with Dual-Scale Morphologies. ACS Applied Materials & Interfaces.

Deniz Ezgi Gulmez, Jesus Maldonado, Kunal Masania, Jos Sinke, Clemens Dransfeld (2023). Quantification of structural response and edge orientation of Chopped Tape Thermoplastic Composites in net-shaped specimens. Composite Structures.

C. B. G. Brito, J. Teuwen, C. A. Dransfeld, I. F. Villegas (2023). On improving process efficiency and weld quality in ultrasonic welding of misaligned thermoplastic composite adherends. Composite Structures.

Lucian Zweifel, Julian Kupski, Clemens Dransfeld, Baris Caglar, Stephan Baz, Damian Cessario, Götz T. Gresser, Christian Brauner (2023). Multiscale Characterisation of Staple Carbon Fibre-Reinforced Polymers. Journal of Composites Science.

Dong Quan, Jiaming Liu, Liaojun Yao, Clemens Dransfeld, René Alderliesten, Guoqun Zhao (2023). Interlaminar and intralaminar fracture resistance of recycled carbon fibre/PPS composites with tailored fibre/matrix adhesion. Composites Science and Technology.

Chizoba J. Ogugua, Sabin v. Anton, Aditya P. Tripathi, Miguel Dominguez Larrabeiti, Sean O. Van Hees, Jos Sinke, Clemens A. Dransfeld (2023). Energy analysis of autoclave CFRP manufacturing using thermodynamics based models. Composites Part A: Applied Science and Manufacturing.

Christophe Binetruy, Baris Caglar, Lode Daelemans, Clemens Dransfeld, Veronique Michaud (2023). ECCM Research Topic on Advanced Manufacturing of Composites. Frontiers in Materials.

Shichen Liu, Jos Sinke, Clemens Dransfeld (2023). A modified bias-extension test method for the characterisation of intra-ply shear deformability of hybrid metal-composite laminates. Composite Structures.

Vincent Werlen, Richard Vocke, Christian Brauner, Clemens Dransfeld, Véronique Michaud, Christian Rytka (2023). A model for the consolidation of hybrid textiles considering air entrapment, dissolution and diffusion. Composites Part A: Applied Science and Manufacturing.

C. B. G. Brito, J. Teuwen, C. A. Dransfeld, I. F. Villegas (2022). The effects of misaligned adherends on static ultrasonic welding of thermoplastic composites. Composites Part A: Applied Science and Manufacturing.

Dong Quan, Ujala Farooq, Guoqun Zhao, Clemens Dransfeld, René Alderliesten (2022). Recycled carbon fibre mats for interlayer toughening of carbon fibre/epoxy composites. Materials & Design.

Vincent Werlen, Christian Rytka, Stephanie Wegmann, Halime Philipp, Yara Khalaf, Véronique Michaud, Christian Brauner, Clemens Dransfeld (2022). Novel tooling for direct melt impregnation of textile with variotherm injection moulding: Methodology and proof of concept. Journal of Composite Materials.

Lucian Zweifel, Christian Brauner, Julie Teuwen, Clemens Dransfeld (2022). In Situ Characterization of the Reaction-Diffusion Behavior during the Gradient Interphase Formation of Polyetherimide with a High-Temperature Epoxy System. Polymers.

Wojciech Szmyt, Carlos Guerra-Nuñez, Lukas Huber, Clemens Dransfeld, Ivo Utke (2022). Atomic Layer Deposition on Porous Substrates: From General Formulation to Fibrous Substrates and Scaling Laws. Chemistry of Materials.

Luigi Fazzi, Giacomo Struzziero, Clemens Dransfeld, Roger Michael Groves (2022). A single three-parameter tilted fibre Bragg grating sensor to monitor the thermosetting composite curing process. Advanced Manufacturing: Polymer & Composites Science.

Ozan Çelik, S. M. Amin Hosseini, Ismet Baran, Wouter J. B. Grouve, Remko Akkerman, Daniël M. J. Peeters, Julie J. E. Teuwen, Clemens A. Dransfeld (2021). The influence of inter-laminar thermal contact resistance on the cooling of material during laser assisted fiber placement. Composites Part A: Applied Science and Manufacturing.

F. Köhler, I. F. Villegas, C. Dransfeld, A. Herrmann (2021). Static ultrasonic welding of carbon fibre unidirectional thermoplastic materials and the influence of heat generation and heat transfer. Journal of Composite Materials.

Nico Katuin, Daniël M. J. Peeters, Clemens A. Dransfeld (2021). Method for the Microstructural Characterisation of Unidirectional Composite Tapes. Journal of Composites Science.

A. X. H. Yong, A. Aktas, D. May, A. Endruweit, S. v. Lomov, S. Advani, P. Hubert, S. G. Abaimov, D. Abliz, I. Akhatov, M. A. Ali, S. Allaoui, T. Allen, D. C. Berg, S. Bickerton, B. Caglar, P. Causse, A. Chiminelli, S. Comas-Cardona, M. Danzi, J. Dittmann, C. Dransfeld, P. Ermanni, E. Fauster, A. George, J. Gillibert, Q. Govignon, R. Graupner, V. Grishaev, A. Guilloux, M. A. Kabachi, A. Keller, K. Kind, D. Large, M. Laspalas, O. v. Lebedev, M. Lizaranzu, A. C. Long, C. López, K. Masania, V. Michaud, P. Middendorf, P. Mitschang, S. Van Oosterom, R. Schubnel, N. Sharp, P. Sousa, F. Trochu, R. Umer, J. Valette, J. H. Wang (2021). Experimental characterisation of textile compaction response: A benchmark exercise. Composites Part A: Applied Science and Manufacturing.

A. Keller, R. Geissberger, J. Studer, F. Leone, D. Stefaniak, J. A. Pascoe, C. Dransfeld, K. Masania (2021). Experimental and numerical investigation of ply size effects of steel foil reinforced composites. Materials & Design.

Ujala Farooq, Sönke Heuer, Julie Teuwen, Clemens Dransfeld (2021). Effect of a Dwell Stage in the Cure Cycle on the Interphase Formation in a Poly(ether imide)/High Tg Epoxy System. ACS Applied Polymer Materials.

Ozan Çelik, Abhas Choudhary, Daniël Peeters, Julie Teuwen, Clemens Dransfeld (2021). Deconsolidation of thermoplastic prepreg tapes during rapid laser heating. Composites Part A: Applied Science and Manufacturing.

S. Gomarasca, D. M. J. Peeters, B. Atli-Veltin, C. Dransfeld (2021). Characterising microstructural organisation in unidirectional composites. Composites Science and Technology.

Shichen Liu, Jos Sinke, Clemens Dransfeld (2021). An inter-ply friction model for thermoset based fibre metal laminate in a hot-pressing process. Composites Part B: Engineering.

U. Farooq, J. Teuwen, C. Dransfeld (2020). Toughening of Epoxy Systems with Interpenetrating Polymer Network (IPN): A Review. Polymers (Basel).

Wojciech Szmyt, Carlos Guerra-Nuñez, Clemens Dransfeld, Ivo Utke (2020). Solving the inverse Knudsen problem: Gas diffusion in random fibrous media. Journal of Membrane Science.

D. Quan, R. Alderliesten, C. Dransfeld, I. Tsakoniatis, S. Teixeira De Freitas, G. Scarselli, N. Murphy, A. Ivanković, R. Benedictus (2020). Significantly enhanced structural integrity of adhesively bonded PPS and PEEK composite joints by rapidly UV-irradiating the substrates. Composites Science and Technology.

F. Schadt, M. Rueppel, C. Brauner, Y. Courvoisier, K. Masania, C. Dransfeld (2020). Non-linear bending compliance of thin ply composite beams by local compression flange buckling. Composite Structures.

Ozan Çelik, Daniël Peeters, Clemens Dransfeld, Julie Teuwen (2020). Intimate contact development during laser assisted fiber placement: Microstructure and effect of process parameters. Composites Part A: Applied Science and Manufacturing.

D. Quan, R. Alderliesten, C. Dransfeld, N. Murphy, A. Ivanković, R. Benedictus (2020). Enhancing the fracture toughness of carbon fibre/epoxy composites by interleaving hybrid meltable/non-meltable thermoplastic veils. Composite Structures.

D. Quan, R. Alderliesten, C. Dransfeld, I. Tsakoniatis, R. Benedictus (2020). Co-cure joining of epoxy composites with rapidly UV-irradiated PEEK and PPS composites to achieve high structural integrity. Composite Structures.

Admin (2019). An example preprint / working paper.

PDF Code Dataset Poster Video Source Document Custom Link

W. Woigk, C. A. Fuentes, J. Rion, D. Hegemann, A. W. Van Vuure, C. Dransfeld, K. Masania (2019). Interface properties and their effect on the mechanical performance of flax fibre thermoplastic composites. Composites Part A: Applied Science and Manufacturing.

Madeleine Grossman, Dmitriy Pivovarov, Florian Bouville, Clemens Dransfeld, Kunal Masania, André R. Studart (2019). Hierarchical Toughening of Nacre-Like Composites. Advanced Functional Materials.

W. Woigk, C. A. Fuentes, J. Rion, D. Hegemann, A. W. Van Vuure, E. Kramer, C. Dransfeld, K. Masania (2019). Fabrication of flax fibre-reinforced cellulose propionate thermoplastic composites. Composites Science and Technology.

Marion Frey, Meri Zirkelbach, Clemens Dransfeld, Eric Faude, Etienne Trachsel, Mikael Hannus, Ingo Burgert, Tobias Keplinger (2019). Fabrication and Design of Wood-Based High-Performance Composites https://www.jove.com/video/60327. JoVE.

Julia Studer, Clemens Dransfeld, Jon Jauregui Cano, Andre Keller, Marianne Wink, Kunal Masania, Bodo Fiedler (2019). Effect of fabric architecture, compaction and permeability on through thickness thermoplastic melt impregnation. Composites Part A: Applied Science and Manufacturing.

J. Cugnoni, R. Amacher, S. Kohler, J. Brunner, E. Kramer, C. Dransfeld, W. Smith, K. Scobbie, L. Sorensen, J. Botsis (2018). Towards aerospace grade thin-ply composites: Effect of ply thickness, fibre, matrix and interlayer toughening on strength and damage tolerance. Composites Science and Technology.

C. A. Fuentes, Y. Zhang, H. Guo, W. Woigk, K. Masania, C. Dransfeld, J. De Coninck, C. Dupont-Gillain, D. Seveno, A. W. Van Vuure (2018). Predicting the adhesion strength of thermoplastic/glass interfaces from wetting measurements. Colloids and Surfaces A: Physicochemical and Engineering Aspects.

A. Andrés Leal, Olivia A. Neururer, Alex Bian, Ali Gooneie, Patrick Rupper, Kunal Masania, Clemens Dransfeld, Rudolf Hufenus (2018). Interfacial interactions in bicomponent polymer fibers. Polymer.

R. Geissberger, J. Maldonado, N. Bahamonde, A. Keller, C. Dransfeld, K. Masania (2017). Rheological modelling of thermoset composite processing. Composites Part B: Engineering.

W. Szmyt, S. Vogel, A. Diaz, M. Holler, J. Gobrecht, M. Calame, C. Dransfeld (2017). Protective effect of ultrathin alumina film against diffusion of iron into carbon fiber during growth of carbon nanotubes for hierarchical composites investigated by ptychographic X-ray computed tomography. Carbon.

M. Rueppel, J. Rion, C. Dransfeld, C. Fischer, K. Masania (2017). Damping of carbon fibre and flax fibre angle-ply composite laminates. Composites Science and Technology.

A. Keller, H. M. Chong, A. C. Taylor, C. Dransfeld, K. Masania (2017). Core-shell rubber nanoparticle reinforcement and processing of high toughness fast-curing epoxy composites. Composites Science and Technology.

A. Keller, C. Dransfeld, A. C. Taylor, K. Masania, K. Ritter, S. Sprenger (2016). Cure kinetics of a fast cure epoxy with silica nanoparticles. JEC Composites Magazine.

J. Studer, C. Dransfeld, K. Masania (2016). An analytical model for B-stage joining and co-curing of carbon fibre epoxy composites. Composites Part A: Applied Science and Manufacturing.

Admin, Robert Ford (2015). An example journal article. Journal of Source Themes, 1(1).

R. Amacher, W. Smith, C. Dransfeld, J. Botsis, J. Cugnoni (2015). Thin Ply: From Size-Effect Characterization to Real Life Design. Journal of Advanced Materials.

Maxime Roux, Nicolas Eguémann, Clemens Dransfeld, Frédéric Thiébaud, Dominique Perreux (2015). Thermoplastic carbon fibre-reinforced polymer recycling with electrodynamical fragmentation: From cradle to cradle. Journal of Thermoplastic Composite Materials.

A. Keller, K. Masania, A. C. Taylor, C. Dransfeld (2015). Fast-curing epoxy polymers with silica nanoparticles: properties and rheo-kinetic modelling. Journal of Materials Science.

Admin, Robert Ford (2013). An example conference paper. In ICW.

PDF Cite Code Dataset Video Source Document